MILLER Plasma Cutting

Miller - Plasma Cutters - Spectrum 125C $1,125.00 $956.25 On Sale! MIL 907149 A built-in, heavy-duty compressor makes this a cut-as-you-go machine anywhere power is available. • Class: Light Industrial • Unit supplies DC weld output • Unit requires 1-Phase input power • Process: Air Plasma Cutting • Rated Output: 12 A at 110 VDC, 35% duty cycle • Dimensions: H: 13in (330mm), W: 8 1/2in (216mm), D: 16in (406mm) • Net Weight: 50lb (22.7kg) Features: • Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow. • Solid-state, constant-current design offers consistent 12 amp cutting arc for continuous quality cutting up to 3/16 in steel in steel. • Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life. • LVC™ line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts. • Can be powered by any Miller engine drive with generator power (e.g. Bobcat™) or equivalent competitive equipment. See Spec Sheet for kW requirements. • 35% duty cycle is tested at 40° C (104° F) to give you the cutting power whenever you need it. • Starts without high-frequency so it will not interfere with or damage controls or computer. Includes: • Plasma Cutter • ICE-12 C hand-held torch with 20 ft (6.1 m) cable • Heavy-duty work clamp with 20 ft (6.1 m) cable • 10 ft (3 m) power cord • Extra consumables (2 electrodes, 2 tips) Quantity

Miller - Plasma Cutters - Spectrum 375 $1,395.00 $1,185.75 On Sale! MIL 903891 Mild Steel Cutting Capability • Pilot Arc Controller improves tip life and increases cutting capabilities and speeds • Dual input voltage allows either 115 or 230 VAC input power and provides patented protection in case of incorrect switch position. Unit provides full cutting capacity when powered by most engine-driven welders with 240 VAC auxiliary receptacles. • LVC line voltage compensation provides peak performance power under variable conditions (power fluctuations up to +/- 15%) for steady cuts and cleaner ending cuts. • Power factor correction expands operator's work area via extension cords while minimizing nuisance trips caused by voltage drops. • LED indicatiors for pressure, power, cup and temperature allow faster troubleshooting. • Starts without high-frequency so it will not interfere with or damage controls or computers. Process: Air Plasma Cutting Dimensions: H: 13in (330mm), W: 8 1/2in (216mm), D: 16in (406mm) Net Weight: 49lb (22kg) Includes: ICE-27C hand-held torch with 20ft (6.1m) cable, 15ft (4.6m) work cable with heavy-duty clamp, 10ft (3m) power cord with 115 VAC, 20 A plug. Extra consumables (3 electrodes, 3 tips and 1 air fitting), Built-in gas/air filter and regulator with extra protection Case Pack: 1 UOM: Each Quantity

Miller - Plasma Cutters - Spectrum 375 X-TREME $1,495.00 $1,270.75 On Sale! MIL 907303 Mild Steel Cutting Capability • X-TREME™ Versatility - Auto-Line provides state-of-the-art flexibility. Automatically connects to 115-230 VAC, single-phase power, 50/60 Hz, without removing covers to relink the unit. No longer is there a concern if you have the correct machine for the shop or job site. • X-TREME™ Portability - Portable in the shop or at the job site - at 18 pounds the shoulder strap allows you to easily move from location to location. • Miller's exclusive multi-voltage plug (MVP™) allows connection to 115 or 230 V receptacles without tools - choose the plug that fits the receptacle and connect it to the power cord. • LVC™ line voltage compensation provides peak performance power under variable conditions (power fluctuations up to +/- 15%) for steady cuts and cleaner ending cuts. • Can be powered by any Miller engine drive with generator power (e.g. Bobcat™) or equivalent competitive equipment. • LED indicators for pressure, power, cup and temperature allow faster troubleshooting, eliminating unnecessary downtime. • Ergonomic design ICE-27T torch with increased comfort, safety trigger, and improved swirl ring and cup. • Factory pre-set air - no need to adjust the air pressure. The unit automatically regulates the proper internal air pressure to the torch. • Gas/air filter/regulator inside the power source provides added protection during transportation. Standard air connection on back panel for easy gas or air hookup. • Starts without high-frequency so it will not interfere with or damage controls or computers. Process: Air Plasma Cutting Dimensions: H: 9in (220mm), W: 5 1/2in (140mm), D: 13 1/4in (337mm) Net Weight with Torch: 18lb (8.2kg) Ship Weight with Torch: 23lb (10.5kg) Includes: ICE-27C hand-held torch with 12ft (3.7m) cable, 12ft (3.7m) work cable with heavy-duty clamp, 10ft (3m) power cord, consumables box with 3 electrodes and 3 tips, MVP plugs 5-15P (115 V, 15 A), 6-50P (230 V, 50 A). Case Pack: 1 UOM: Each Quantity

Miller - Plasma Cutters - Spectrum 375 X-TREME, X-CASE $1,525.00 $1,296.25 On Sale! MIL 907339 Mild Steel Cutting Capability • X-TREME™ Versatility - Auto-Line provides state-of-the-art flexibility. Automatically connects to 115-230 VAC, single-phase power, 50/60 Hz, without removing covers to relink the unit. No longer is there a concern if you have the correct machine for the shop or job site. • X-TREME™ Protection - model with X-CASE™ provides ultimate protection during transport and storage. Additional space ideal for MVP plugs, consumable box, as well as gloves, eye protection, etc. • X-TREME™ Portability - Portable in the shop or at the job site - at 18 pounds the shoulder strap allows you to easily move from location to location. • Miller's exclusive multi-voltage plug (MVP™) allows connection to 115 or 230 V receptacles without tools - choose the plug that fits the receptacle and connect it to the power cord. • LVC™ line voltage compensation provides peak performance power under variable conditions (power fluctuations up to +/- 15%) for steady cuts and cleaner ending cuts. • Can be powered by any Miller engine drive with generator power (e.g. Bobcat™) or equivalent competitive equipment. • LED indicators for pressure, power, cup and temperature allow faster troubleshooting, eliminating unnecessary downtime. • Ergonomic design ICE-27T torch with increased comfort, safety trigger, and improved swirl ring and cup. • Factory pre-set air - no need to adjust the air pressure. The unit automatically regulates the proper internal air pressure to the torch. • Gas/air filter/regulator inside the power source provides added protection during transportation. Standard air connection on back panel for easy gas or air hookup. • Starts without high-frequency so it will not interfere with or damage controls or computers. Process: Air Plasma Cutting Dimensions: H: 9in (220mm), W: 5 1/2in (140mm), D: 13 1/4in (337mm) Net Weight with Torch: 18lb (8.2kg) Ship Weight with Torch: 23lb (10.5kg) Includes: ICE-27C hand-held torch with 12ft (3.7m) cable, 12ft (3.7m) work cable with heavy-duty clamp, 10ft (3m) power cord, X-CASE model provides protection in transport and storage, Consumables box with 3 electrodes and 3 tips, MVP plugs 5-15P (115 V, 15 A), 6-50P (230 V, 50 A). Case Pack: 1 UOM: Each Quantity

Miller - Plasma Cutters - Spectrum 625 $2,095.00 $1,780.75 On Sale! MIL 907058 Mild Steel Cutting Capabiltiy • Class: Industrial • Unit supplies DC weld output • Unit requires single-phase input power • Process: Air Plasma Cutting and Gouging • Rated Output: 40 A at 140 VDC, 50% Duty Cycle • Dimensions: H: 15 1/4in (387mm), W: 10 3/8in (264mm), D: 17 1/4in (438mm) • Net Weight: 49lb (22kg) (includes 25ft torch, work clamp and cord, and power cord) • Wind Tunnel technology prevents abrasive dust and particles from damaging internal components. • Power factor correction draws 30% less amperage than the competition for the same cutting range and expands operator's work area via extension cords while minimizing nuisance trips caused by voltage drops. • Can be powered by any Miller welding generator with power output of 8 KW or more, such as the Bobcat or Trailblazer, or equivalent competitive equipment. • Fan-On-Demand cooling system only operates when needed, reducing the amount of airborne dust/dirt pulled through the unit. • LVC line voltage comensation provides peak performance power under variable input voltage conditions (176-264 V) for steady cuts and cleaner ending cuts. • Starts without high-frequency so it will not interfere with or damage controls or computers. Includes: • ICE-40C hand-held torch with 25ft (7.6m) cable • 20ft (6.1m) heavy-duty (8 AWG) work cable with clamp • 12ft (3.7m) industrial power cord and plug • Extra consumables Case Pack: 1 UOM: Each Quantity

Miller - Plasma Cutters - Spectrum 2050 $2,899.00 $2,609.10 On Sale! MIL 903777012 Mild Steel Cutting Capability • Class: Heavy Industrial • Unit requires1-Phase or 3-Phase input power • Process: Air Plasma Cutting and Gouging • Rated Output: 55 A at 110 VDC, 60% Duty Cycle, 3-Phase or 55 A at 110 VDC, 50% Duty Cycle, 1-Phase • Dimensions: H: 17in (432mm), W: 12 1/2in (318mm), D: 20 1/2in (521mm) • Net Weight: 70lb (32kg) • Auto-Line automatically links unit to any primary voltage from 208 to 575 volts, single or three-phase, 50 or 60Hs. • Can be powered by any Miller welding generator with auxiliary power output of 8 KW or more, such as the Bobcat or Trailblazer, or equivalent competitive equipment. • Wind Tunnel Technology prevents abrasive dust and particles from damaging internal components. • Fan-On-Demand cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit. • Starts without high-frequency so it will not interfere with or damage controls or computers. Includes: • ICE-55C hand-held torch with 25ft (7.6m) cable • 20ft (6.1m) work cable with clamp • 10ft (3m) power cord • Extra consumables Case Pack: 1 UOM: Each Quantity

Miller - Plasma Cutters - Spectrum 1000 $3,737.00 $3,363.30 On Sale! MIL 907162011 Heavy Fabrication/Manufacturing • Class: Heavy Industrial • Unit requires: 1-Phase or 3-Phase input power • Process: Air Plasma Cutting and Gouging • Rated Output at 104° F (40°C): 3-Phase 80 A at 150 VDC, 60% Duty Cycle (230-575 V), 50% Duty Cycle (208 V), 1-Phase 80 A at 150 VDC, 50% Duty Cycle (230 V), 40% Duty Cycle (208 V) • Dimensions: H: 17in (432mm), W: 12 1/2in (318mm), D: 20 1/2in (521mm) • Net Weight: 92 lb (41.7 kg) • Auto-Line™ automatically connects unit to any primary input voltage from 208 to 575 volts single- or three-phase, 50 or 60 Hz. • Auto-Refire™ provides ultimate convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. • LVC™ line voltage compensation • Fan-On-Demand™, • Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components. • CNC/Robotic Machine Interface is standard on all units, allowing automated control and rapid changeover to mechanized operation. • Quick-connect torch allows for easy torch connection or removal. Includes: • ICE-80T Hand-held torch with 25 ft (7.6m) • Extra consumables • Heavy-duty work clamp with 25 ft (7.6m) or 50 ft (15.2m) cable. • 12 ft (3.7m) power cord. Quantity

Miller - Plasma Cutters - Spectrum 1251 $4,895.00 $4,405.50 On Sale! MIL 907305011 Heavy Fabrication/Manufacturing • Class: Heavy Industrial • Unit requires 3-Phase input power • Process: Air Plasma Cutting and Gouging • Rated Output at 104° F (40°C): • 100 A at 160 VDC • 380 - 575 V: 80% Duty Cycle • 230 V: 50% Duty Cycle • 208 V: 40% Duty Cycle • Dimensions: H: 17in (432mm), W: 12 1/2in (318mm), D: 20 1/2in (521mm) • Net Weight: with torch: 97 lb (44.0 kg) • Auto-Line™ automatically connects unit to any primary input voltage from 208 to 575 volts, three-phase, 50 or 60 Hz. • LVC™ line voltage compensation provides peak performance power under variable input voltage conditions (187–630 V) for steady cuts and cleaner ending cuts. • Auto-Refire™ technology provides ultimate convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. • Fan-On-Demand™ cooling system only operates when needed, reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine. • Wind Tunnel Technology™ prevents dust and particles from damaging internal components. • Superior gouging capability provides an extremely long gouging arc for those hard-to-reach, heavy applications. Plasma arc gouging produces less dust, smoke and other harmful environmental hazards compared to carbon arc gouging. • CNC/Robotic Machine Interface is standard on all units, allowing automated control and rapid changeover to mechanized operation. • NEW! Patented Ultra-Quick Connect™ torch offers the fastest plasma torch connection and removal in the industry. • NEW! Miller’s rugged ICE-100T torch provides a rated cut of 1-1/4 in (32 mm), longer consumable life, and a torch cable that is more resistant to burns and cuts. Includes: • Plasma cutter • ICE-100T hand-held torch with 25 ft (7.6 m) • Heavy-duty work clamp with 25 ft (7.6 m) • 12 ft (3.7 m) power cord • Extra consumables Quantity

1111 Pierce Butler Route St. Paul, MN 55104 Phone: 651-644-7273 Toll Free: 800-774-1336 Fax: 651-644-2973

info@oxyserv.com

1002 Industrial Drive So Sauk Rapids, MN 56379 Phone: 320-252-5494 Toll Free: 800-252-3275 Fax: 320-230-3300

Everything for Welding!

An Equal Opportunity Employer