Miller MIG (GMAW)/Flux Cored (FCAW) Welders

Miller - Welders - MIG - Millermatic 140 $764.00 $649.40 On Sale! MIL 907311 Millermatic 140 with Auto-Set™ Class: Light Industrial Light Industrial Applications: Light Fabrication, Maintenance and Repair, Auto Body, and Farm/Home Input Power: 115 V, 20 A, 60 Hz, Single Phase Rated Output: 90 A at 18 VDC, 20% Duty Cycle, 63 A at 21 VDC, 20% Duty Cycle Processes: MIG (GMAW), Flux Cored (FCAW) Amperage Range: 30 - 140 A Max. Open-Circuit Voltage: 28 • New! Auto-Set™ is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG, minus the guesswork! • New! Smooth-Start™ patent-pending technology provides a smooth, spatter-free start. It's the best-starting machine in the small MIG machine category. No pop gun starts and no spatter to clean up. • Durable cast aluminum feedhead incorporates dual groove quick-change drive roll and calibrated, spring-loaded tension arm designed to make setup easier and faster. • Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools. • "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather then unit. • Self-resetting motor protection circuit eliminates the need to find and replace fuses. • Easy access to output studs provides convenient polarity changeover when changing from solid or flux cored wires. • Semiautomatic constant voltage wire welding package is capable of welding 24 guage up to 3/16 in (0.8 - 4.8 mm) mild steel. • Standard built-in solid-state contactor circuit makes wire electrically "cold" until trigger is pulled, making the unit safer. It's also easier to position torch to work before starting weld. • Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with mild/stainless steel and .030 - .035 in (0.8 - 0.9 mm) flux cored. Comes complete with: Power source 6 ft (1.8 m) power cord and plug 10 ft (3 m) M-10 MIG gun and cable assembly 10 ft (3 m) work cable and clamp Smith™ Argon and AR/CO2 mix regulator/flow gauge with hose Spool of Hobart® .024 in (0.6 mm) solid wire Two contact tips for .024 in (0.6 mm) wire and two contact tips for .030 in (0.8 mm) wire Dual groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) wire Factory-installed gas solenoid valve Information/settings chart Set-up and operation video Material thickness gauge Note: Shielding gas and safety equipment not included. Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Millermatic 212 $1,683.00 $1,430.55 On Sale! MIL 907324 Processes: MIG (GMAW), Flux-Cored (FCAW) Dimensions: H: 30in (762mm), W: 19in (483mm), D: 40in (1016mm) Net Weight: 190 LB (86kg) • Seven taps provide wider welding range of 30-210 A with superior performance throughout its operating range. • Angled industrial, dual-gear-driven, aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob. • EZ-Access™ consumable compartment and parameter chart provides convenient flip-down compartment for fast access to consumables and parameter chart. • EZ-Change™ cylinder rack is a low rack that provides safer, easier cylinder loading. Includes: 15 ft (4.5 m) 250 amp M-25 gun 10 ft (3 m) work cable with clamp Factory-installed dual gas solenoids Smith® Argon mix regulator/flow gauge with hose 7 ft (2.1 m) power cord and plug Factory-installed running gear/cylinder rack .035/.045 in reversible dual groove drive rolls Extra contact tips Set-up and operation CD Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Millermatic 350 $3,888.00 $3,304.80 On Sale! MIL 907299 Welds materials 22 gauge up to 1/2 in thick. Industrial Applications:Fabrication, Maintenance and Repair, Farm, Manufacturing, Industrial Unit supplies DC weld output Unit supplies CV weld output Unit requires 1-Phase or 3-Phase input power Processes: MIG (GMAW), Flux-Cored (FCAW) Dimensions: H: 34in (863mm), W: 19in (483mm), D: 41in (1041mm) Net Weight: 181lb (82kg) • Single- and three-phase input power compatible on all models. • Line voltage compensation for constant output with fluctuations in input power. • Easy-to-use digital user interface with backlit words and alpha-numeric displays for showing words and numbers. • Operational information and parameter charts available inside front flip-down door. All machine setup and weld parameter information is provided directly below the user interface. Tip and drive roll storage also available behind the door. • Direct connection for optional push-pull gun. Connects to unit without any upgrade to create push-pull system. Also able to utilize 12 in rolls of aluminum wire for extended welding time. Compatible with XR™-Pistol, XR™-Edge and NEW! XR-A Python® guns. • Large storage area for manuals, gloves, tools, etc. and removable gun and cable holder. • Industrial, 4-roll wire drive system features two easy-to-set, scaled, tension adjustments and quick-change reversible drive rolls for .035 and .045 wire. Includes: > C-4012 Roughneck® MIG fun Industrial power cord (without plug) for single- or three-phase Work cable with clamp Factory-installed gas solenoid Argon mix regulator/flow meter Factory-installed, low-mounted running gear/cylinder rack Drive rolls and contact tips Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - CP-302 $2,790.00 MIL 903786 CP-302 power sources deliver flexible and dependable performance and productivity in the most demanding semiautomatic applications. Class:Industrial, Heavy Industrial Unit supplies DC weld output Unit supplies CV weld output Unit requires 3-Phase input power Processes: MIG (GMAW), Flux Cored (FCAW) Dimensions: H: 30in (762mm), W: 23in (585mm), D: 30 1/2in (775mm) Net Weight: 332lb (151kg) • Adjustable weld stabilizer (high-low inductance) provides the flexibility to produce the optimal arc characteristics. • Solid-state weld contactor provides longevity to match the ultra-durable and reliable reputation of the CP Series • Presettable welding voltage allows you to easily set weld output before welding. • Power efficiency gives exceptional value and return on your investment. • Large analog voltmeter and ammeter for easy viewing. * CP-302 MIGRunner (#907 050) shown Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Delta-Fab System $4,325.00 MIL 951022 "Simple" best describes this system designed for light and medium fabrication. Excellent arc performance is combined with an operator-friendly layout with controls on the wire feeder so it can be used in a work cell or a remote location. Class: Industrial Unit supplies DC weld output Unit supplies CV weld output Unit requires 3-Phase input power Process: MIG (GMAW) Dimensions: H: 30in (762mm), W: 23in (585mm), D: 30 1/2in (775mm) Net Weight: 38lb (173kg) • Four-drive-roll feeding system with independent tension control handles small and large diameter wires. • Large analog volt and ammeters for easy viewing. • Adjustable output studs provide the flexibility to produce the optimal arc characteristics for aluminum, stainless steel and all other materials. • Solid-state weld contactor provides longevity to match the ultra-durable and reliable reputation of the Delta-Fab. • Remote voltage control is standard. Parameter adjustments can be made in weld cell or at a remote location. • 14-pin receptacle provides quick, direct connection to wire feeders and accessories. • 115 VAC duplex receptacle provides 15 amps of auxiliary power. • 14-pin select is easy to set up with no external switches to put in the wrong position. * Shown with optional Roughneck C-4015 gun. Includes: Power source included 24A Four drive roll Wire Feeder Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Deltaweld 452 $4,570.00 MIL 903377 Name your welding wire job and the Deltaweld will tackle it: heavy machinery, trucks and trailers, railcars, pressure vessels, structural steel, sheet metal fabrication, automotive components, metal furniture and more. Class: Heavy Industrial Unit supplies DC weld output Unit supplies CV weld output Unit requires 3-Phase input power Processes: MIG (GMAW), Flux Cored (FCAW), Air Carbon Arc Cutting and Gouging (CAC-A), Dimensions: H: 30in (762mm), W: 23in (585mm), D: 38in (966mm) Net Weight: 384lb (174kg) • Line voltage compensation keeps welding parameters constant even when input voltages change ±10%. Eliminates need to change welding parameters throughout the day. • Two positive output terminals allow operators to optimize arc performance. • Fan-On-Demand™ cooling system operates only when needed. Reduces contaminants drawn into the machine and excess noise in work areas. • Enclosed circuit board provides additional protection by eliminating contaminants which cause premature failure of components. • Thermal overload protection automatically shuts down the system to prevent high repair costs. • Remote control capability allows operators fine tuning capability at an extended distance. • 15 amp 115 VAC duplex receptacle allows operators the flexibility to run grinders, drills, coolers, etc. from power source without the need for additional 115 VAC power in weld area. • Power efficient for exceptional value and return on your investment. • Digital meters for presetting or monitoring welding voltage or amperage for more precise control. Includes: Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Invision 354MP $7,913.00 MIL 907051 The Invision 354MP combines the advantages of an inverter-based power source with built-in pulse features for pulsed MIG welding. Class: Industrial Unit supplies DC weld output Unit supplies CC/CV weld output Unit requires 1-Phase or 3-Phase input power Processes: MIG (GMAW), Pulsed MIG (GMAW-P), Stick (SMAW), Flux Cored (FCAW), Air Carbon Arc Cutting and Gouging (CAC-A) Dimensions: H: 17in (432mm), W: 12 1/2in (318mm), D: 24in (610mm) Net Weight: 76lb (34.5kg) • Built-in pulsed MIG capability which eliminates pendants and cables that could potentially get damaged or lost. • Microprocessor-based Technology™ allows process parameter storage to be retained between power down and power up and also between program changes. • Large setup screen to choose pulse welding mode • Dual digital meters for quick and easy viewing. • Remote control of arc trim allows wire feeder complete control of arc parameters. • Pulsed spray transfer helps reduce spatter and fume levels. • Fan-On-Demand™ improves power efficiency and noise reduction. • Wind Tunnel Technolgy™ boards from contamination, significantly improving reliability. • Power source included Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Millermatic 140 with Auto-Set $625.00 MIL 907335 Processes: MIG (GMAW), Flux-Cored (FCAW) Dimensions: H: 15 3/4in (400mm), W: 10 5/8in (270mm), D: 17 1/2in (445mm) Net Weight: 60 LB (27kg) • NEW! Spool gun compatible. Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic 140 with Auto-Set, the NEW Spoolmate™ 100 Series spool gun allows you to weld from 18 - 24 gauge aluminum. • Smooth-Start™ patent-pending technology provides a smooth, spatter-free start. It's the best starting machine in the small MIG category. No pop gun starts and no spatter to clean up. • Durable cast aluminum feedhead incorporates dual-groove quick-change drove roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster. • "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit. • Standard built-in solid-state contractor circuit makes wire electrically "cold" until trigger is pulled, making the unit safer. It's also easier to position torch to work before starting weld. • Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools. • Easy access to output studs provides convenient polarity changeover when switching from solid or flux cored wires. • Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024-.030 in (0.6-0.8 mm) mild/stainless steel and .030-.035 in (0.8-0.9 mm) flux cored. Includes: 10 ft (3 m) M-10 MIG gun and cable assembly #195 605 10 ft (3 m) work cable with clamp Factory-installed gas solenoid valve Smith® regulator and gas hose 6 ft (1.8 m) power cord with plug Dual groove quick-change drive roll for .024 in (0.6 m) or .030/.035 in (0.8/0.9 mm) wire Extra contact tips Hobart® spool of solid wire Information/settings chart Set-up and operation CD Material thickness gauge #229 895 Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Millermatic 180 with Auto-Set $759.95 MIL 907312 Processes: MIG (GMAW), Flux-Cored (FCAW) Dimensions: H: 15 3/4in (400mm), W: 10 5/8in (270mm), D: 17 1/2in (445mm) Net Weight: 72 LB (33kg) • NEW! Millermatic 180 with Auto-Set™ features the breakthrough control that automatically sets your welder to the proper parameters. It works with .024 and .030 in solid steel wire, (75 percent argon/25 percent CO2) shielding gas, and provides all-in-one MIG, minus the guesswork. Just set the wire size, set the material thickness, and start welding. • Spool gun compatible. Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic 180 with Auto-Set, the NEW Spoolmate™ 100 Series spool gun allows you to weld from 18 gauge - 1/4 inch aluminum. • Welds thickest metal in class - up to 5/16 in mild steel in a single pass! • Smooth-Start™ patent-pending technology provides a smooth, spatter-free start. • Durable cast aluminum feedhead incorporates dual-groove quick-change drove roll and calibrated, spring-loaded tension arm designed to make set up easier and faster. • "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit. • Standard built-in solid-state contractor circuit makes wire electrically "cold" until trigger is pulled, making the unit safer. It's also easier to position torch to work before starting weld. • Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools. Includes: 10 ft (3 m) M-10 MIG gun and cable assembly #195 605 10 ft (3 m) work cable with clamp Factory-installed gas solenoid valve Smith® regulator and gas hose 6 ft (1.8 m) power cord with plug Dual groove quick-change drive roll for .024 in (0.6 m) or .030/.035 in (0.8/0.9 mm) wire Extra contact tips Hobart® spool of solid wire Information/settings chart Set-up and operation CD Material thickness gauge #229 895 Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Millermatic 252 $1,939.95 MIL 907321 Processes: MIG (GMAW), Flux-Cored (FCAW) Dimensions: H: 30in (762mm), W: 19in (483mm), D: 40in (1016mm) Net Weight: 207 LB (94kg) • Infinite voltage control with digital meters have self-calibrating meters that permit presetting of voltage and wire feed speed. Ensures precise parameters and accuracy. • Integrated timers menu comes complete with presettable preflow/postflow, burnback, spot and delay (Stich) timers. • Angled industrial, dual-gear-driven, aluuminum drive system features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob. • NEW! Superior aluminum MIG welding with direct connection of optional XR push-pull guns or Spoolmatic 15A or 30A. No extra module to buy or install. • Auto-Gun Detect™ automatically adjusts voltage and wire speed for faster, easier switching between MIG, push-pull and spool guns. • Line voltage compensation keeps welding parameters constant even when input voltages change plus or minus 10 percent. Eliminates the need to change welding parameters throughout the day. • Fan-On-Demand™ cooling sytem only operates when needed reducing power consumption. • EZ-Change™ cylinder rack is a low rack that provides safer, easier cylinder loading. • EZ-Access™ consumable compartment and parameter chart provides convenient flip-down compartment for fast access to consumables and parameter chart. • NEW! 15 ft (4.5 m) M-25 MIG gun features durable one-piece handle, unicable outer jacket, trigger rated for one million cycles, and steel spring coils protecting cable ends. Includes: 15 ft (4.5 m), 250 amp M-25 MIG gun 10 ft (3 m) work cable with clamp Factory-installed gas solenoid Smith® Argon mix regulator/flow gauge with hose 10 ft (3 m) industrial power cord and plug (plug on 200/230 V model only) Factory-installed running gear/cylinder rack .035/.045 in reversible dual groove drive rolls Extra contact tips Set-up and operation CD Case Pack: 1 UOM: Each Quantity

1111 Pierce Butler Route St. Paul, MN 55104 Phone: 651-644-7273 Toll Free: 800-774-1336 Fax: 651-644-2973

info@oxyserv.com

1002 Industrial Drive So Sauk Rapids, MN 56379 Phone: 320-252-5494 Toll Free: 800-252-3275 Fax: 320-230-3300

Everything for Welding!

An Equal Opportunity Employer