Miller MultiOPERATOR Systems

Miller - Welders - MultiOPERATORS - CST 280 $11,380.00 907247 RACK, CST-280, 220-230/460-575, TWECO Rugged enclosure provides simple means for protecting and transporting mutiple welding power sources for construction, maintenance/repair and shipbuilding applications. Processes: Stick (SMAW), TIG (GTAW), Air Carbon Arc (CAC-A) thru 5/16" carbons Dimensions: H: 50-3/4 in (1289 mm), W: 25-1/2 in (648 mm), D: 26-1/2 in (673 mm) 4-CST Net Weight: 330lb (150kg) Empty Rack Net Weight: 166lb (75kg) • Light weight and small footprint for easy transportation. The low weight enables the use of elevators to move the rack. • Top Cover protects machines from falling debris. • Lifting eye simplifies transportation using crane or overhead lifting device. • Lift truck side and end fork pockets. • One main disconnect box with fused circuit breaker switches for each machine. • Common output ground connection (for same polarity use only). • Optional dual rack kit connects two CST racks to form and 8-pack rack, utilizing one input power cable and one lift. • Optional running gear available for transporting the rack. *These inverter racks are not suitable with older inverter models. Case Pack: 1 UOM: Each Quantity

Miller - Welders - MultiOPERATORS - XMT 304 Rack - 4 Pk. $17,774.00 907292 RACK 4-PK, XMT304 CC/CV 230/460 FUSED FOR 460 VAC XMT Rack conveniently houses multiple inverter power sources for multiple welders. This is an ideal system for onsite applications including construction and shipbuilding. Class: Heavy Industrial Processes: MIG (GMAW), Pulsed MIG (GMAW-P)*, Stick (SMAW), TIG (GTAW), Pulsed TIG (GTAW-P)*, Flux Cored (FCAW), Air Carbon Arc (CAC-A) Cutting and Gouging Dimensions: H: 59 3/8in (1508mm), W: 43in (1092mm), D: 34 3/8in (873mm) Net Weight: 560lb (254kg) • Both 4-rack and 6-rack models are available with two lifting eyes for transportation and rugged skids for dragging or pushing. • One easy connection allows up to six inverters to be connected with one primary power drop. • Meets NEC requirements when properly installed and utilizing recommended primary circuit protection and proper fuse selection for primary power applied to rack. • All racks, factory equipped with power sources, include 20 A fuses to provide primary power line protection for each inverter power supply on 460 VAC. (575 VAC operation, if applicable, also utilizes 20 A fuses). • Visual indication window is built into fuses to assist troubleshooting. • Fuse holders are designed to accommodate fuses for both 300 A (208-575 VAC) and 450 A (380-575 VAC) inverters in all voltage ranges applicable to power source. • One easy connection allows up to six inverters to be connected with one primary power drop. • Easy power source removal from rack with ability to wire conventional plug for applications remote from rack. • Rack roof panel and power source shelves are fabricated from galvanized steel and painted for added protection in harsh environments. • All racks can be equipped with optional running gear. The large 5in diameter wheels enables the rack to be moved over grating and driveway gravel. • Protected from the elements, the electrical junction box is located well under the galvanized roof panel. • Meets IP23, which is more stringent than IP23S or IP23M ratings. • Liquid-tight strain reliefs provided on both welding power source and electrical junction box. Strain relief is designed to resist salt water, alcohol, oil, grease, and common solvents. • Lifting eyes simplify transportation using crane or overhead lifting device. • Dual isolated work terminals provide a convenient connection point for common work piece construction. (Same polarity only.) • Rugged steer skids stand up to the rugged construction environment. • Lift truck side and end fork pockets in base to enable loading and work site repositioning with fork lift. • Custom build your own system by mix and matching Miller's XMT 304, 350, 456 CC/CV, XMT 350 VS, and Invision 354MP, 456MP, and 456P (450 A inverters maximum - 4 units). • XMT 304 Rack - fuses provide primary power line protection for each inverter power supply. *These inverter racks are not suitable with older inverter models. Case Pack: 1 UOM: Each Quantity

Miller - Welders - MultiOPERATORS - XMT 304 Rack - 6 Pk. $25,008.00 907291 RACK 6-PK, XMT 304 CC/CV 230/460 FUSED FOR 460 VAC XMT Rack conveniently houses multiple inverter power sources for multiple welders. This is an ideal system for onsite applications including construction and shipbuilding. Class: Heavy Industrial Processes: MIG (GMAW), Pulsed MIG (GMAW-P)*, Stick (SMAW), TIG (GTAW), Pulsed TIG (GTAW-P)*, Flux Cored (FCAW), Air Carbon Arc (CAC-A) Cutting and Gouging Dimensions: H: 59 3/8in (1508mm), W: 43in (1092mm), D: 34 3/8in (873mm) Net Weight: 712lb (323kg) • Both 4-rack and 6-rack models are available with two lifting eyes for transportation and rugged skids for dragging or pushing. • One easy connection allows up to six inverters to be connected with one primary power drop. • Meets NEC requirements when properly installed and utilizing recommended primary circuit protection and proper fuse selection for primary power applied to rack. • All racks, factory equipped with power sources, include 20 A fuses to provide primary power line protection for each inverter power supply on 460 VAC. (575 VAC operation, if applicable, also utilizes 20 A fuses). • Visual indication window is built into fuses to assist troubleshooting. • Fuse holders are designed to accommodate fuses for both 300 A (208-575 VAC) and 450 A (380-575 VAC) inverters in all voltage ranges applicable to power source. • One easy connection allows up to six inverters to be connected with one primary power drop. • Easy power source removal from rack with ability to wire conventional plug for applications remote from rack. • Rack roof panel and power source shelves are fabricated from galvanized steel and painted for added protection in harsh environments. • All racks can be equipped with optional running gear. The large 5in diameter wheels enables the rack to be moved over grating and driveway gravel. • Protected from the elements, the electrical junction box is located well under the galvanized roof panel. • Meets IP23, which is more stringent than IP23S or IP23M ratings. • Liquid-tight strain reliefs provided on both welding power source and electrical junction box. Strain relief is designed to resist salt water, alcohol, oil, grease, and common solvents. • Lifting eyes simplify transportation using crane or overhead lifting device. • Dual isolated work terminals provide a convenient connection point for common work piece construction. (Same polarity only.) • Rugged steer skids stand up to the rugged construction environment. • Lift truck side and end fork pockets in base to enable loading and work site repositioning with fork lift. • Custom build your own system by mix and matching Miller's XMT 304, 350, 456 CC/CV, XMT 350 VS, and Invision 354MP, 456MP, and 456P (450 A inverters maximum - 4 units). • XMT 304 Rack - fuses provide primary power line protection for each inverter power supply. *These inverter racks are not suitable with older inverter models. Case Pack: 1 UOM: Each Quantity

Miller - Welders - MultiOPERATORS - XMT 350 Rack - 4 Pk. $17,112.00 907227 RACK 4-PK, XMT350 VS 208-575 FUSED FOR 460/575VAC XMT Rack conveniently houses multiple inverter power sources for multiple welders. This is an ideal system for onsite applications including construction and shipbuilding. Class: Heavy Industrial Unit supplies DC weld output Unit supplies CC/CV, CC weld output Unit requires 1-Phase or 3-Phase input power *Note: Above info. depends upon which machines are used in the inverter rack. Processes: MIG (GMAW), Pulsed MIG (GMAW-P)*, Stick (SMAW), TIG (GTAW), Pulsed TIG (GTAW-P)*, Flux Cored (FCAW), Air Carbon Arc (CAC-A) Cutting and Gouging Dimensions: H: 64in (1626mm), W: 43in (1092mm), D: 34 3/8in (873mm) Net Weight: 599lb (272kg) • Both 4-rack and 6-rack models are available with two lifting eyes for transportation and rugged skids for dragging or pushing. • Custom build your own system by mix and matching Miller's XMTฎ 304 CC/CV and 456 CC/CV, CST™ 400, and Invision™ 354MP, 456MP, and 456P. (Invision 456MP maximum - 4 units) • One easy connection allows up to six inverters to be connected with one primary power drop. • Isolated work terminal provides a connection point for common workpiece construction. • XMT 350 Rack - operates with primary voltage from 208 to 575 VAC and is equipped with "finger safe" fuses to help comply with NEC guidelines. *These inverter racks are not suitable with older inverter models. Case Pack: 1 UOM: Each Quantity

Miller - Welders - MultiOPERATORS - XMT 350 Rack - 6 Pk. $24,100.00 907228 RACK 6-PK, XMT350 VS 208-575 FUSED FOR 460/575 VAC XMT Rack conveniently houses multiple inverter power sources for multiple welders. This is an ideal system for onsite applications including construction and shipbuilding. Class: Heavy Industrial Unit supplies DC weld output Unit supplies CC/CV weld output Unit requires 3-Phase input power *Note: Above info. depends upon which machines are used in the inverter rack. Processes: MIG (GMAW), Pulsed MIG (GMAW-P)*, Stick (SMAW), TIG (GTAW), Pulsed TIG (GTAW-P)*, Flux Cored (FCAW), Air Carbon Arc (CAC-A) Cutting and Gouging Dimensions: H: 64in (1626mm), W: 43in (1092mm), D: 34 3/8in (873mm) Net Weight: 759lb (344kg) • Both 4-rack and 6-rack models are available with two lifting eyes for transportation and rugged skids for dragging or pushing. • One easy connection allows up to six inverters to be connected with one primary power drop. • Meets NEC requirements when properly installed and utilizing recommended primary circuit protection and proper fuse selection for primary power applied to rack. • All racks, factory equipped with power sources, include 20 A fuses to provide primary power line protection for each inverter power supply on 460 VAC. (575 VAC operation, if applicable, also utilizes 20 A fuses). • Visual indication window is built into fuses to assist troubleshooting. • Fuse holders are designed to accommodate fuses for both 300 A (208-575 VAC) and 450 A (380-575 VAC) inverters in all voltage ranges applicable to power source. • One easy connection allows up to six inverters to be connected with one primary power drop. • Easy power source removal from rack with ability to wire conventional plug for applications remote from rack. • Rack roof panel and power source shelves are fabricated from galvanized steel and painted for added protection in harsh environments. • All racks can be equipped with optional running gear. The large 5in diameter wheels enables the rack to be moved over grating and driveway gravel. • Protected from the elements, the electrical junction box is located well under the galvanized roof panel. • Meets IP23, which is more stringent than IP23S or IP23M ratings. • Liquid-tight strain reliefs provided on both welding power source and electrical junction box. Strain relief is designed to resist salt water, alcohol, oil, grease, and common solvents. • Lifting eyes simplify transportation using crane or overhead lifting device. • Dual isolated work terminals provide a convenient connection point for common work piece construction. (Same polarity only.) • Rugged steer skids stand up to the rugged construction environment. • Lift truck side and end fork pockets in base to enable loading and work site repositioning with fork lift. • Custom build your own system by mix and matching Miller's XMT 304, 350, 456 CC/CV, XMT 350 VS, and Invision 354MP, 456MP, and 456P (450 A inverters maximum - 4 units). • XMT 350 Rack - operates with primary voltage from 208 to 575 VAC and is equipped with "finger safe" fuses to help comply with NEC guidelines. *These inverter racks are not suitable with older inverter models. Case Pack: 1 UOM: Each Quantity

Miller - Welders - MultiOPERATORS - Mark VI $16,827.00 903512 Compact, multiple operator systems supply a complete solution to your demanding multi-arc welding requirements. Four or six modules are available in one rugged steel enclosure. Class: Heavy Industrial Processes: Stick (SMAW), TIG (GTAW), Air Carbon Arc Cutting and Gouging (CAC-A), Flux Cored (FCAW) and MIG Spray Transfer (GMAW) with voltage-sensing feeder, MIG (GMAW) with CC/CV units Dimensions: H: 65in (1651mm), W: 56 3/4in (1442mm), D: 34 1/2in (870mm) Net Weight: 1825lb (828kg) • Multiple capabilities CC or CC/CV Versatility and outstanding arc welding performances in both CV (MIG) and CC (TIG and Stick). CC/CV module has a high quality arc for welding with cored wire. CC module has the same great arc characteristics as the Gold Starฎ 302. • Four to six, easy to remove and connect welding modules, can be paralleled for higher output. • Steel Frame - weighs less than one ton, fits through 36 in door. • Adjustable arc control prevents sticking electrodes. Electrode compensation circuit ensures arc control regardless of electrode size. • Line voltage compensation keeps output constant, even if primary input power varies by 10%. • 14-pin receptacle provides quick, direct connection to Miller wire feeders and accessories. • Hot Start™ feature easily starts difficult electrodes. • Optional Low OCV in CC/CV modules reduces maximum open-circuit voltage to 26 volts in CC and CV modes when not welding. • Lift-Arc™ Simply touch the tungsten to the work piece...lift...and the arc is initiated instantly and automatically without the use of high frequency. Case Pack: 1 UOM: Each Quantity

Miller - Welders - MultiOPERATORS - Mark VIII-2 $27,410.00 901348 This durable, heavy-duty multiple-operator welding system drives eight modules from a single main transformer. Class: Heavy Industrial Unit supplies DC weld output Unit supplies CC weld output Unit requires 3-Phase input power Processes: Stick (SMAW), TIG (GTAW), Air Carbon Arc Cutting and Gouging (CAC-A), Flux Cored (FCAW) and MIG Spray Transfer (GMAW) with voltage-sensing feeder Dimensions: H: 70 1/4in (1.8m), W: 72in (7.8m), D: 40in (1m) Net Weight: 4050lb (1837kg) provides excellent arc and puddle control. • Eight modules driven by one transformer can be paralleled for higher ouput. • Remote control allows operators fine tuning at an extended distance. (Optional RHC-3 required.) • 15 amp 115 VAC duplex receptacle allows operators the flexibility to run grinders, drills, coolers, etc. from power source. • Multiple capabilities - Stick, TIG, Air Carbon Arc cutting and gouging, and Flux Cored welding with a voltage-sensing feeder. • Rugged and durable steel frame. Case Pack: 1 UOM: Each Quantity

1111 Pierce Butler Route St. Paul, MN 55104 Phone: 651-644-7273 Toll Free: 800-774-1336 Fax: 651-644-2973

info@oxyserv.com

1002 Industrial Drive So Sauk Rapids, MN 56379 Phone: 320-252-5494 Toll Free: 800-252-3275 Fax: 320-230-3300

Everything for Welding!

An Equal Opportunity Employer