MIG (GMAW) Welding

Miller - Welders - MIG - Millermatic 252 $1,939.95 MIL 907321 Processes: MIG (GMAW), Flux-Cored (FCAW) Dimensions: H: 30in (762mm), W: 19in (483mm), D: 40in (1016mm) Net Weight: 207 LB (94kg) • Infinite voltage control with digital meters have self-calibrating meters that permit presetting of voltage and wire feed speed. Ensures precise parameters and accuracy. • Integrated timers menu comes complete with presettable preflow/postflow, burnback, spot and delay (Stich) timers. • Angled industrial, dual-gear-driven, aluuminum drive system features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob. • NEW! Superior aluminum MIG welding with direct connection of optional XR push-pull guns or Spoolmatic 15A or 30A. No extra module to buy or install. • Auto-Gun Detect™ automatically adjusts voltage and wire speed for faster, easier switching between MIG, push-pull and spool guns. • Line voltage compensation keeps welding parameters constant even when input voltages change plus or minus 10 percent. Eliminates the need to change welding parameters throughout the day. • Fan-On-Demand™ cooling sytem only operates when needed reducing power consumption. • EZ-Change™ cylinder rack is a low rack that provides safer, easier cylinder loading. • EZ-Access™ consumable compartment and parameter chart provides convenient flip-down compartment for fast access to consumables and parameter chart. • NEW! 15 ft (4.5 m) M-25 MIG gun features durable one-piece handle, unicable outer jacket, trigger rated for one million cycles, and steel spring coils protecting cable ends. Includes: 15 ft (4.5 m), 250 amp M-25 MIG gun 10 ft (3 m) work cable with clamp Factory-installed gas solenoid Smith® Argon mix regulator/flow gauge with hose 10 ft (3 m) industrial power cord and plug (plug on 200/230 V model only) Factory-installed running gear/cylinder rack .035/.045 in reversible dual groove drive rolls Extra contact tips Set-up and operation CD Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Millermatic 212 and Spoolmate 3035 Spool Gun $2,069.95 MIL 951068 The Welder... Processes: MIG (GMAW), Flux-Cored (FCAW) Dimensions: H: 30in (762mm), W: 19in (483mm), D: 40in (1016mm) Net Weight: 190 LB (86kg) • Seven taps provide wider welding range of 30-210 A with superior performance throughout its operating range. • Angled industrial, dual-gear-driven, aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob. • EZ-Access™ consumable compartment and parameter chart provides convenient flip-down compartment for fast access to consumables and parameter chart. • EZ-Change™ cylinder rack is a low rack that provides safer, easier cylinder loading. Includes: 15 ft (4.5 m) 250 amp M-25 gun 10 ft (3 m) work cable with clamp Factory-installed dual gas solenoids Smith® Argon mix regulator/flow gauge with hose 7 ft (2.1 m) power cord and plug Factory-installed running gear/cylinder rack .035/.045 in reversible dual groove drive rolls Extra contact tips Set-up and operation CD The Gun... Process: MIG (GMAW) with aluminum and other soft alloy wires • Add the optional Spoolmate™ 3035 spool gun for aluminum welding. Easy to install with new, direct hook up. • Gun-On-Demand™, simply pull the trigger for either gun and you're ready to weld. No wasted time installing modules and using toggle switches. • Light industrial spool gun rated at 150 amps at 60 percent duty cycle. • Cable sheath and spring strain relief. • 20 ft weld/control cables provide reach and accessibility to your work. • Lightweight and well-balanced to improve operator comfort. • Spool canister protects the wire and allows you to easily see the spool. • Easy to remove barrel assembly. * This package (MIL 951068) includes a Millermatic 212 and Spoolmate 3035 (20 ft) for aluminum welding. Case Pack: 1 UOM: Each Quantity

ESAB - Welders - MIG - Migmaster 253 $2,256.00 $1,469.95 On Sale! ESA 0558005370 Complete, easy-to-use 250 amp welding package ideal for a wide range of light and medium duty applications Exclusive Power Smoothing Device™ delivers exceptional "three-phase" performance in a single phase machine - with CO2 or Ar/CO2 mixture Easy to change polarity - can be used with solid or self-shielding cored wires (steel, stainless, and aluminum) from 0.023" to 0.045" Equipped with multi-step voltage switch and wire speed potentiometer - makes it easy to change welding parameters for a variety of applications Spot time and adjustable burnback built in Fan-cooled and equipped with thermal overload protection Built-in spool gun control with gun-on-demand Comes with ESAB's MXL 200 torch™ Comes complete ready to weld with 10 ft. MXL 200, 10 ft. primary input cable with plug, 10 ft. work cable with clamp, 5 ft. gas hose, Shelf & chain for gas cylinder UOM: Each Quantity

Hobart - Welders - MIG - IronMan 250 $2,031.00 MIL 500408 The IronMan 250 is an affordable welding package that is efficient in design and service. Unit has Constant-voltage DC power source Processes: MIG (GMAW), Flux Cored (FCAW) Dimensions: H: 31 1/4in (794mm), W: 18 7/8in (479 mm), D: 36 1/2in (927 mm) Net Weight: 195lb (88kg) • Welds 22 gauge up to 1/2 inch material in a single pass • Excellent aluminum welding with optional Spoolmate™ 3545 spool gun, no module needed for hookup • Seven-tap voltage control allows for a smooth easy-to-control arc • Infinite wire feed speed control for precise adjustment of penetration and weld bead shape • Comes complete with 200 amp gun and built-in running gear/cylinder rack • Handles wire spools up to 12 in (33 lb) - wire feed speed adjusts from 90 to 750 IPM • Built-in thermal overload protects the unit • Reversible drive rolls: two grooves for three wire sizes on one drive roll. Decreases spare parts and changeover time • Hinged door for easy access to wire drive system for spool and drive roll changes Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - CP-302 $2,790.00 MIL 903786 CP-302 power sources deliver flexible and dependable performance and productivity in the most demanding semiautomatic applications. Class:Industrial, Heavy Industrial Unit supplies DC weld output Unit supplies CV weld output Unit requires 3-Phase input power Processes: MIG (GMAW), Flux Cored (FCAW) Dimensions: H: 30in (762mm), W: 23in (585mm), D: 30 1/2in (775mm) Net Weight: 332lb (151kg) • Adjustable weld stabilizer (high-low inductance) provides the flexibility to produce the optimal arc characteristics. • Solid-state weld contactor provides longevity to match the ultra-durable and reliable reputation of the CP Series • Presettable welding voltage allows you to easily set weld output before welding. • Power efficiency gives exceptional value and return on your investment. • Large analog voltmeter and ammeter for easy viewing. * CP-302 MIGRunner (#907 050) shown Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Deltaweld 452 $4,570.00 MIL 903377 Name your welding wire job and the Deltaweld will tackle it: heavy machinery, trucks and trailers, railcars, pressure vessels, structural steel, sheet metal fabrication, automotive components, metal furniture and more. Class: Heavy Industrial Unit supplies DC weld output Unit supplies CV weld output Unit requires 3-Phase input power Processes: MIG (GMAW), Flux Cored (FCAW), Air Carbon Arc Cutting and Gouging (CAC-A), Dimensions: H: 30in (762mm), W: 23in (585mm), D: 38in (966mm) Net Weight: 384lb (174kg) • Line voltage compensation keeps welding parameters constant even when input voltages change ±10%. Eliminates need to change welding parameters throughout the day. • Two positive output terminals allow operators to optimize arc performance. • Fan-On-Demand™ cooling system operates only when needed. Reduces contaminants drawn into the machine and excess noise in work areas. • Enclosed circuit board provides additional protection by eliminating contaminants which cause premature failure of components. • Thermal overload protection automatically shuts down the system to prevent high repair costs. • Remote control capability allows operators fine tuning capability at an extended distance. • 15 amp 115 VAC duplex receptacle allows operators the flexibility to run grinders, drills, coolers, etc. from power source without the need for additional 115 VAC power in weld area. • Power efficient for exceptional value and return on your investment. • Digital meters for presetting or monitoring welding voltage or amperage for more precise control. Includes: Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Millermatic 350P $3,449.95 MIL 907300 Processes: MIG (GMAW), Flux-Cored (FCAW), Pulsed MIG (GMAW-P) Dimensions: H: 34in (863mm), W: 19in (483mm), D: 41in (1041mm) Net Weight: 181 LB (82kg) • Aluminum Pulse Hot Start™ automatically provides more arc power to eliminate a "cold start" that is inherent with aluminum starts. • Superior aluminum performance on thin material down to 19 gauge with a direct connection for optional XR™ push-pull gun or Spoolmatic® spool gun. • Built-in Pulsed MIG programs. All programmed information is restored after each power up - aluminum/steel/stainless steel/metal core. • Exclusive Gun-On-Demand™ allows use of a standard MIG gun, optional Spoolmatic® spool gun, or optional XR™ push-pull gun without flipping a switch. • Reduce wire feeding issues - new patent-pending Wire Monitoring Software automatically detects feeding issues and stops the wirefeed system before birdnests occur. • Adjustable Crater feature optimizes crater size for steel, stainless and aluminum applications. • SharpArc® optimizes the size and shape of the arc cone, bead width and appearance, and puddle fluidity. • Fan-On-Demand™ cooling system only operates when needed, reducing power consumption and keeping internal components cleaner. Includes: 15 ft (4.5 m) Bernard® Q300 MIG gun with Centerfire™ consumables 10 ft (3 m) work cable with clamp Factory-installed gas solenoid Smith® Argon mix regulator/flow gauge with hose 10 ft (3 m) industrial power cord (without plug) for single- or three-phase Factory-installed, low-mounted running gear/cylinder rack .035/.045 in reversible V-groove drive rolls (order U-groove drive rolls for aluminum welding) Extra contact tips Set-up and operation CD Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Millermatic 350 $3,888.00 $3,304.80 On Sale! MIL 907299 Welds materials 22 gauge up to 1/2 in thick. Industrial Applications:Fabrication, Maintenance and Repair, Farm, Manufacturing, Industrial Unit supplies DC weld output Unit supplies CV weld output Unit requires 1-Phase or 3-Phase input power Processes: MIG (GMAW), Flux-Cored (FCAW) Dimensions: H: 34in (863mm), W: 19in (483mm), D: 41in (1041mm) Net Weight: 181lb (82kg) • Single- and three-phase input power compatible on all models. • Line voltage compensation for constant output with fluctuations in input power. • Easy-to-use digital user interface with backlit words and alpha-numeric displays for showing words and numbers. • Operational information and parameter charts available inside front flip-down door. All machine setup and weld parameter information is provided directly below the user interface. Tip and drive roll storage also available behind the door. • Direct connection for optional push-pull gun. Connects to unit without any upgrade to create push-pull system. Also able to utilize 12 in rolls of aluminum wire for extended welding time. Compatible with XR™-Pistol, XR™-Edge and NEW! XR-A Python® guns. • Large storage area for manuals, gloves, tools, etc. and removable gun and cable holder. • Industrial, 4-roll wire drive system features two easy-to-set, scaled, tension adjustments and quick-change reversible drive rolls for .035 and .045 wire. Includes: > C-4012 Roughneck® MIG fun Industrial power cord (without plug) for single- or three-phase Work cable with clamp Factory-installed gas solenoid Argon mix regulator/flow meter Factory-installed, low-mounted running gear/cylinder rack Drive rolls and contact tips Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Delta-Fab System $4,325.00 MIL 951022 "Simple" best describes this system designed for light and medium fabrication. Excellent arc performance is combined with an operator-friendly layout with controls on the wire feeder so it can be used in a work cell or a remote location. Class: Industrial Unit supplies DC weld output Unit supplies CV weld output Unit requires 3-Phase input power Process: MIG (GMAW) Dimensions: H: 30in (762mm), W: 23in (585mm), D: 30 1/2in (775mm) Net Weight: 38lb (173kg) • Four-drive-roll feeding system with independent tension control handles small and large diameter wires. • Large analog volt and ammeters for easy viewing. • Adjustable output studs provide the flexibility to produce the optimal arc characteristics for aluminum, stainless steel and all other materials. • Solid-state weld contactor provides longevity to match the ultra-durable and reliable reputation of the Delta-Fab. • Remote voltage control is standard. Parameter adjustments can be made in weld cell or at a remote location. • 14-pin receptacle provides quick, direct connection to wire feeders and accessories. • 115 VAC duplex receptacle provides 15 amps of auxiliary power. • 14-pin select is easy to set up with no external switches to put in the wrong position. * Shown with optional Roughneck C-4015 gun. Includes: Power source included 24A Four drive roll Wire Feeder Case Pack: 1 UOM: Each Quantity

Miller - Welders - MIG - Invision 354MP $7,913.00 MIL 907051 The Invision 354MP combines the advantages of an inverter-based power source with built-in pulse features for pulsed MIG welding. Class: Industrial Unit supplies DC weld output Unit supplies CC/CV weld output Unit requires 1-Phase or 3-Phase input power Processes: MIG (GMAW), Pulsed MIG (GMAW-P), Stick (SMAW), Flux Cored (FCAW), Air Carbon Arc Cutting and Gouging (CAC-A) Dimensions: H: 17in (432mm), W: 12 1/2in (318mm), D: 24in (610mm) Net Weight: 76lb (34.5kg) • Built-in pulsed MIG capability which eliminates pendants and cables that could potentially get damaged or lost. • Microprocessor-based Technology™ allows process parameter storage to be retained between power down and power up and also between program changes. • Large setup screen to choose pulse welding mode • Dual digital meters for quick and easy viewing. • Remote control of arc trim allows wire feeder complete control of arc parameters. • Pulsed spray transfer helps reduce spatter and fume levels. • Fan-On-Demand™ improves power efficiency and noise reduction. • Wind Tunnel Technolgy™ boards from contamination, significantly improving reliability. • Power source included Case Pack: 1 UOM: Each Quantity

1111 Pierce Butler Route St. Paul, MN 55104 Phone: 651-644-7273 Toll Free: 800-774-1336 Fax: 651-644-2973

info@oxyserv.com

1002 Industrial Drive So Sauk Rapids, MN 56379 Phone: 320-252-5494 Toll Free: 800-252-3275 Fax: 320-230-3300

Everything for Welding!

An Equal Opportunity Employer