Miller - Millermatic 140 with Auto-Set - SALE

Processes: MIG (GMAW), Flux-Cored (FCAW)
Dimensions: H: 15 3/4in (400mm), W: 10 5/8in (270mm), D: 17 1/2in (445mm)
Net Weight: 60 LB (27kg)

• NEW! Spool gun compatible. Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic 140 with Auto-Set, the NEW Spoolmate™ 100 Series spool gun allows you to weld from 18 - 24 gauge aluminum.
• Smooth-Start™ patent-pending technology provides a smooth, spatter-free start. It's the best starting machine in the small MIG category. No pop gun starts and no spatter to clean up.
• Durable cast aluminum feedhead incorporates dual-groove quick-change drove roll and spring-loaded tension arm with calibrated tension knob, all designed to make set up easier and faster.
• "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit.
• Standard built-in solid-state contractor circuit makes wire electrically "cold" until trigger is pulled, making the unit safer. It's also easier to position torch to work before starting weld.
• Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
• Easy access to output studs provides convenient polarity changeover when switching from solid or flux cored wires.
• Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024-.030 in (0.6-0.8 mm) mild/stainless steel and .030-.035 in (0.8-0.9 mm) flux cored.

Includes:

• 10 ft (3 m) M-10 MIG gun and cable assembly #195 605
• 10 ft (3 m) work cable with clamp
• Factory-installed gas solenoid valve
• Smith® regulator and gas hose
• 6 ft (1.8 m) power cord with plug
• Dual groove quick-change drive roll for .024 in (0.6 m) or .030/.035 in (0.8/0.9 mm) wire
• Extra contact tips
• Hobart® spool of solid wire
• Information/settings chart
• Set-up and operation CD
• Material thickness gauge #229 895

Case Pack: 1
UOM: Each

Top of Page ^