Miller - Millermatic 180 with Auto-Set - SALE

Processes: MIG (GMAW), Flux-Cored (FCAW)
Dimensions: H: 15 3/4in (400mm), W: 10 5/8in (270mm), D: 17 1/2in (445mm)
Net Weight: 72 LB (33kg)

• NEW! Millermatic 180 with Auto-Set™ features the breakthrough control that automatically sets your welder to the proper parameters. It works with .024 and .030 in solid steel wire, (75 percent argon/25 percent CO2) shielding gas, and provides all-in-one MIG, minus the guesswork. Just set the wire size, set the material thickness, and start welding.
• Spool gun compatible. Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic 180 with Auto-Set, the NEW Spoolmate™ 100 Series spool gun allows you to weld from 18 gauge - 1/4 inch aluminum.
• Welds thickest metal in class - up to 5/16 in mild steel in a single pass!
• Smooth-Start™ patent-pending technology provides a smooth, spatter-free start.
• Durable cast aluminum feedhead incorporates dual-groove quick-change drove roll and calibrated, spring-loaded tension arm designed to make set up easier and faster.
• "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit.
• Standard built-in solid-state contractor circuit makes wire electrically "cold" until trigger is pulled, making the unit safer. It's also easier to position torch to work before starting weld.
• Thermal overload protection shuts down unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.

Includes:

• 10 ft (3 m) M-10 MIG gun and cable assembly #195 605
• 10 ft (3 m) work cable with clamp
• Factory-installed gas solenoid valve
• Smith® regulator and gas hose
• 6 ft (1.8 m) power cord with plug
• Dual groove quick-change drive roll for .024 in (0.6 m) or .030/.035 in (0.8/0.9 mm) wire
• Extra contact tips
• Hobart® spool of solid wire
• Information/settings chart
• Set-up and operation CD
• Material thickness gauge #229 895

Case Pack: 1
UOM: Each

Top of Page ^