THERMAL ARC Engine Driven Welding

Thermal Arc - Welders - Engine Driven - Scout TA-4/170-H $2,946.00 $2,540.95 On Sale! THA 11-1002 Outstanding low end performance excellent for E6010 electrode operation Design allows for easy maintenance with a single sided service center of the engine driven welder High frequency protection Engine offers easy starts, low fuel consumption and reduced noise Low oil/pressure shutdown Muffler Heavy-duty rugged roll case design Auxiliary Power! Highest available while welding Engine: Honda GX270 OHV Processes: STICK (SMAW), TIG (GTAW) Scratch Amperage Range: 30-170 Amps Auxiliary Power: 4 KVA (230V, 60 Hz., 1 Phase), 2 KVA (115V, 60 Hz., 1 Phase) Fuel Tank: 1.6 gal. (6L) Engine Type: 1-Cylinder, Air Cooled, Gas Oil Capacity: 1 qt. (1.1L) Industrial Applications: Mobile Repair Vehicles, Mining, General Construction, Professional Welding, Structural Fabrication, Rental Operations, Maintenance Vehicles, In-plant Maintenance, Railroad Maintenance, Standby Power, Pipe Welding Rated Output: 170 Amp at 26V, 60% Input Voltage: 115/230 VAC Compatible Wire Feeders: Hefty II CC/CV HP and Welding Speed: 9 HP at 3,600 RPM Welding Output Connector: 1/2 in. (50mm) Dinse Connector Included Features: 9 HP, Gas Fueled, Air-Cooled Honda Engine UOM: Each Quantity

Thermal Arc - Welders - Engine Driven - Raider 10000 Pro $6,455.00 $5,569.95 On Sale! THA 1-1021 Auxiliary Power available while welding 4 Pin Receptacle 14 pin amphenol for remote control of welding contactor, amperage and voltage Rugged output terminals allows for easy polarity reversal and cable change Honda 20 HP Engineoffers easy start, low fuel consumption and reduced noise One Turn Welding Control Knob controls welding amperage and voltage for the complete range of the machine Warning System Low oil level shutdown, battery charge shutdown E6010 Performance, outstanding low end performance, especially on E6010 electrode operation Automatic Idle automatically adjusts to amperage draw, current draw, saves fuel and reduces noise Rugged Heavy-Duty Stainless Steel full canopy design Stainless Steel 20 gal. fuel tank Unique Power-Plus Patented Alternator delivers a smooth weld output Separate windings used for welding and auxiliary power, offering the highest quality auxiliary power Engine: Honda GX620K1VX Processes: STICK (SMAW), MIG (GMAW), Flux Cored (FCAW), Air Carbon Arc Cutting and Gouging (CAG), TIG (GTAW) LIFT Battery: 12 Volt, 500 Cold Cranking Amps Amperage Range: 15-270 Amps Auxiliary Power: 8.5 KVA (230V, 60 Hz., 1 Phase),10 KVA (460V, 60 Hz., 3 Phase), 8.5 KVA (115V, 60 Hz., 1 Phase) Fuel Tank: 10 gal. (38L) Fuel Consumption at Rate Load: .0862 gal./Kwh (313g/Kwh) Idle Speed: 2,400 RPM Engine Type: 2-Cylinder, Air Cooled, Gas Oil Capacity: 0.42 gal. (1.5L) Industrial Applications: Pipe Welding, Mobile Repair Vehicles, Contractors, Mining, General Construction, Professional Welding, Utility Companies, Structural Fabrication, Rental Operations, Maintenance Vehicles, In-plant Maintenance, Railroad Maintenance Rated Output: 225 Amp at 25V, 100% (CV), 250 Amp at 25V, 100% (CC) Input Voltage: 115/230/460 VAC Compatible Wire Feeders: Hefty II CC/CV PortaFeed VS 212 HP and Welding Speed: 20 HP at 3,600 RPM Welding Output Connector: 1/2 in. (50mm) Dinse Connector Lifting Eye: 2 in. (50mm) Diameter Hook Included Features: 20 HP, Gas Fueled, Air-Cooled Honda Engine, Engine Warning System adn Low Oil Shut Down UOM: Each Quantity

1111 Pierce Butler Route St. Paul, MN 55104 Phone: 651-644-7273 Toll Free: 800-774-1336 Fax: 651-644-2973

info@oxyserv.com

1002 Industrial Drive So Sauk Rapids, MN 56379 Phone: 320-252-5494 Toll Free: 800-252-3275 Fax: 320-230-3300

Everything for Welding!

An Equal Opportunity Employer